DJI Mini 3 Pro

The gimbal ribbon fails long before the camera module does — always test the flex first.

Repairability

5/ 10

medium risk

54% of cases

Symptom: Gimbal motor overload warning, tilted horizon, or camera signal drops mid-flight.
Diagnosis: Check the gimbal ribbon for creases at the yaw arm and confirm the IMU calibration state.
Solution: Replace the gimbal flex cable, then recalibrate the IMU and gimbal.

Community

Questions about this model

DJI Mini 3 Pro gimbal overload after flex replacement
New ribbon fitted, calibration completes, but I get gimbal overload after a minute of hover. Slack issue?
3 answers · 9 votes · Open

Sample demo content created for this prototype — community-style material for evaluation, not official manufacturer repair instructions.